05-03-2011

If your Tungsten T5 PDA has an old battery you might notice the device does not hold a charge like it used to, or the T5 unit might not even turn on at all unless you plug it in. Furtunatly it's still possible to fix it with a little soldering. Follow this do it yourself guide to give your faithful T5 the juice it needs.

05-03-2011

If your Palm TX is no longer staying powered for a long time between charges, or doesn't turn on without a power supply, then you likely need a new replacment battery. Follow this guide for do it yourself instructions and get your old TX working like new. Please note this work does require soldering.

05-03-2011

If your Tungsten E PDA is no longer maintaining a charge, and you have not replaced the original battery - likely you need a new battery. Unfortunatly the Tungsten E battery requires soldering, but if you have the tools and skills you can follow these do it yourself instructions and bring life back to your old friend.

10-10-2010

The Palm III series is a true tank that can run indefinately with standard AAA batteries. But if you device has started to lose memory when you switch batteries, the power seems to be draining too fast,  or you have noticed other instabilities around battery replacement -  you likely need a new memory capacitor. Read this do it yourself guide to fix your PDA.